Skip to content
Get a quote
Wheeled office drawer unit in walnut veneer with black handles

Services

From start to finishwith our own team

We run the whole process ourselves, from site survey and design to manufacturing and installation. The project manager who measures at the survey is also on site for installation and handover, so every detail carries through and the work stays accurate and careful at each stage.

  • On-site survey and measuring
  • Manufacturing in our own factory
  • Installation on site

Process

From survey to installationin four steps

Every job follows the same four steps: site survey, design and approval, manufacturing, installation. You know from the start what happens at each one.

  1. 01

    Site survey and measuring

    We see your space in person and take the measurements ourselves, and we listen to how you use the space and what you need.

    Two hands stretching a yellow tape measure along the plastered wall of an empty room to take a horizontal measurement
  2. 02

    Design and approval

    Layout, interior fittings, materials and colours are settled together on the drawings; we do not start manufacturing without your approval.

    Catalogue open on an old wooden desk showing dark and light wood veneer samples
  3. 03

    Manufacturing in the factory

    The approved design is made in our own factory to the measurements taken, and checked before it leaves for delivery.

    Hands sanding a light-coloured wood panel with an orbital sander in the factory
  4. 04

    Installation on site

    The furniture is installed in place and handed over with alignment, fixing, and door and drawer adjustments complete.

    Fitter seen from behind screwing a hinge onto a wooden door with a cordless drill

Frequently asked questions

About the process

What happens during a site survey visit?

We measure the space and check how level the walls and floor are, and where the windows, doors and services are. On the same visit we talk about how you use the space, your storage needs and the style you like.

Can you quote from measurements I have taken myself?

Measurements and photos you send are very useful for an initial assessment. For manufacturing, we take the measurements ourselves on site, so that nothing fails to fit later.

Can I ask for changes to the design?

Yes, that is what the design stage is for. We put your wishes into the drawings and agree the final version together. Changes after manufacturing has started can waste time and material, so it is best to settle decisions at the design stage.

What needs to be ready at home for installation?

The installation area should be empty and accessible, and building work such as painting, flooring and services should be finished where possible. It helps our planning if you tell us in advance about things like permission from the building management or use of the lift.

What should I do if something needs adjusting after handover?

Doors and drawers may need small adjustments from time to time with use; this is normal. If so, contact us, with a photo if you can.

Quote and site survey

Let’s talk about your space on site

Fill in the form and we will contact you about measuring and the site survey.