Skip to content
Get a quote

Furniture Glossary

Cutting list

A cutting list is the production table of all board parts in a furniture project, with sizes, quantities, materials and edge banding details.

A cutting list is a production table showing every board part that makes up a piece of furniture, with its dimensions, quantity, material and thickness, edge banding sides and required operations. It is derived from the technical drawing and is the basic document for the sizing stage in the factory. A missing or wrong dimension on the list can mean recutting later parts or sometimes a whole project.

A typical list gives the part name or number, length, width, thickness, quantity, material (for example melamine-faced chipboard or MDF), grain direction and which of the four edges receive banding. Some lists also show holes, grooves or rebates. Design software generates the list from the drawing automatically. It is then sent to nesting or optimisation software, which arranges the parts on sheets with the least waste and passes them to the panel saw.

When preparing a list, it must be clear whether the sizes are finished (net) sizes or cut sizes, since the edge band thickness is deducted from the cut size. Parts are labelled, matched to the list and counted after cutting. For customers, a cutting list is also useful for seeing what will be made and for understanding which parts are affected if an extra order or change is made.

Related applications

Joiner planing solid wood on a workbench, with shavings scattered around

Manufacturing

We make the approved design in our own factory to the measurements taken at the survey, and carry out cutting, edge banding, drilling and packing to the approved cutting list.

Furniture project prepared with drawings, a wood sample and a kitchen design on a computer

Design and 3D drawings

Working from the measurements taken at the survey, we decide the layout, interior fittings, materials and colours with you, and settle them on the drawing before manufacturing starts.