Skip to content
Get a quote

Furniture Glossary

Delivery and packaging

Delivery and packaging means packing finished furniture parts protectively and transporting them from the factory to site without damage.

Delivery and packaging is the process of getting furniture parts made in the factory to site intact, unscratched and complete. Finished doors, lacquered panels, and parts with glass or stone surfaces are especially vulnerable to knocks and scratches, so packaging needs as much care as production.

Parts are first cleaned and labelled with details such as product name, room and position number. Surfaces are covered with stretch film, foam, paper or cloth, and corners are protected with cardboard or foam corner pieces. Doors and panels are stacked upright or with protective material between them. Small hardware such as hinges, handles and screws is packed in separate labelled bags attached to the relevant parts. The parts list needed for installation is included in or alongside the packages.

Loading is done with heavy parts at the bottom, delicate parts above and everything secured, so that sliding and rubbing during the journey are prevented. At delivery, packages are counted against the list and inspected by eye, and any damage or shortage is noted immediately. Lift, stair and door widths at the site should be known in advance, since large carcasses are hard to carry through narrow routes. Delivered parts should be kept in a dry, safe area until installation is complete.

Related applications

Joiner planing solid wood on a workbench, with shavings scattered around

Manufacturing

We make the approved design in our own factory to the measurements taken at the survey, and carry out cutting, edge banding, drilling and packing to the approved cutting list.

Fitter installing a wooden cabinet door with a cordless drill

Installation

We install the furniture made in the factory on site, align it to the wall and floor, and hand it over with door, drawer and hardware adjustments done.