A press is a machine used in the furniture workshop to compress glued layers into a single solid part. For veneering, laminating, plywood, edge-glued panels and similar work, it spreads the adhesive evenly and leaves no gaps between layers. Bonds made without enough pressure tend to lift or separate over time.
Presses differ by job. Hydraulic flat presses squeeze the board between platens, hot presses heat the platens so the glue cures faster, and cold presses work at room temperature. Vacuum membrane presses can bond a thin foil or veneer onto curved and profiled surfaces with even pressure at every point. Clamp systems with bars and screws are also used for smaller jobs and solid wood panels.
Press time, temperature and pressure are set according to the glue type and material thickness and should follow the adhesive manufacturer’s guidance. Platen surfaces must be kept clean and flat, because glue residue on a platen leaves marks on the next part. Parts leaving the press are not machined straight away; they rest for a while so the glue fully matures and the part cools and settles flat.


