Skip to content
Get a quote

Furniture Glossary

Quality control

Quality control means checking at every stage of furniture production that dimensions, surfaces, joints and function meet the required standard.

Craftsman in an apron checking a walnut panel at a bench in the factory, with wood and brass samples beside him

Quality control is the checking of furniture at every stage, from material receipt to delivery, to see whether size, surface, joints and function meet the stated requirements. The aim is to catch a defect where it occurs rather than at the end of production. A defect noticed early reduces both material loss and delivery delay.

The process starts with material inspection: board thickness, surface flaws, colour and moisture are checked. During production, cutting dimensions, hole positions, edge band adhesion and the paint surface are checked. Before installation, carcasses are checked for squareness and diagonal difference, doors for gaps and closing, and drawers and hinges for smooth, quiet operation. Dimensions are measured with a steel rule, calliper, tape and square, and surfaces are examined by eye and hand under suitable light.

At delivery, packages and parts are counted against a checklist and checked for visible damage. A final check is made after installation: door adjustment, gap lines, level and wall fixing are reviewed. Defects found are recorded, corrected and re-checked if needed. A good quality control system also reduces the small problems users notice later and contributes to long furniture life.

Related applications

Joiner planing solid wood on a workbench, with shavings scattered around

Manufacturing

We make the approved design in our own factory to the measurements taken at the survey, and carry out cutting, edge banding, drilling and packing to the approved cutting list.

Fitter installing a wooden cabinet door with a cordless drill

Installation

We install the furniture made in the factory on site, align it to the wall and floor, and hand it over with door, drawer and hardware adjustments done.