
Teak oil is a penetrating finish used to nourish and protect outdoor wood, above all teak. Its composition varies between makers, but it often contains linseed or tung oil, solvent and UV-protective additives. Despite the name, it is not only for teak and can be used on similar hardwoods.
Unlike a film-forming varnish, it does not build a thick layer on the surface but soaks into the wood. For that reason it does not peel, and maintenance does not require sanding back and re-varnishing. It brings out the grain, deepens the colour and repels water. Its effect fades over the years with wear and UV, so it needs renewing.
It is used on garden tables and chairs, yacht decks, balcony floors, bathroom and spa timbers and teak worktops. Indoors it can also be applied to kitchen worktops made of oily hardwoods.
Before application, the surface should be clean and dry, and lightly sanded if needed. Apply in thin coats and wipe off the excess; because oil-soaked rags can heat up and ignite spontaneously, dry them flat outdoors or soak them in water. For surfaces that touch food, check that the product is food-safe.



