Skip to content
Get a quote

Furniture Glossary

Cabinet carcass

The carcass is the load-bearing box of a cabinet, made of side, top, bottom and back panels, without the doors and drawer fronts.

The carcass is the load-bearing box of a cabinet, leaving out parts such as doors, drawers and shelves. It is made of side panels, top and bottom panels, rails and a back panel. The quality of the carcass largely decides the cabinet’s strength, load capacity and life.

The most common carcass materials are melamine-faced chipboard and MDF, and moisture-resistant boards are preferred in damp areas and bathrooms. Thickness is generally 16 to 18 mm. Edges are sealed with edge banding, and parts are joined with cam fittings and screws, wooden dowels or concealed connectors. Precise cutting and drilling in the factory helps the carcass go together square and true.

When choosing, check the moisture resistance of the board, the adhesion of the edge banding and the strength of the joints. The lower edge of a carcass close to the floor needs protection from water. Shelf capacity depends on shelf span and board thickness, and long shelves may take a centre support. Fixing the carcass properly to the wall and to neighbouring cabinets also matters for door alignment and smooth drawer operation.

Related applications

Classic cream kitchen with a marble worktop, island and tall stools

RESIDENTIAL

Kitchens

We plan your kitchen around its dimensions, the way you cook and what you need to store. Together we choose the layout, door material, colour and wood finish, interior fittings and accessories, then build it in our own workshop and install it on site.

Joiner planing solid wood on a workbench, with shavings scattered around

Manufacturing

We make the approved design in our own factory to the measurements taken at the survey, and carry out cutting, edge banding, drilling and packing to the approved cutting list.