
The door gap, often called the reveal, is the thin space left between neighbouring cabinet doors, drawer fronts and the carcass. It lets doors open and close without rubbing and leaves allowance for small changes in size with heat and humidity. Even, straight gaps are among the most visible signs of good workmanship in a kitchen or wardrobe.
The gap is usually 2 to 4 mm; it may be narrower in handleless designs and slightly wider for large doors. Evenness depends on precise cutting of the doors, a square carcass and adjustable hinges. Three-way hinge adjustment allows the door height, depth and side position to be corrected. Drawer fronts are aligned through the runner and fixing adjustments.
To keep the gaps even, the level of the floor, the straightness of the wall and the connection between carcasses should be checked during installation. If doors sag over time, the hinge adjustment is redone, which usually takes minutes with a screwdriver. In humid environments materials can expand, so the gap should not be left too narrow. Regular checks keep the doors working with an even gap for many years.


