
A lift-up flap mechanism is a fitting that opens a door upwards instead of sideways and holds it open. Thanks to its arms and gas strut or spring, the door stays up and the user does not bump into it. It is used on wall kitchen cabinets, TV units, office cupboards and storage compartments.
The main types are the single-piece up-opening flap, the two-piece folding flap, the parallel lift-up and the type that raises a plain door by its lower edge. The mechanism is fixed to the inner sides of the carcass, and the force is set according to the size and weight of the door. Some models have soft closing, so the door lowers under control, and some allow the angle at which the door stays open to be adjusted.
The size and weight of the door are critical when choosing, because a mechanism of the wrong strength will let the door drop or fail to hold it up. After fitting, the force should be set and the door checked to see that it balances in every position. Enough free space must be left in front of the cabinet. For maintenance the fixing screws are tightened from time to time and the joints given a little oil, while a seized or failed part is replaced.


