The moisture content of wood is the weight of water in the timber as a percentage of the weight of dry wood. In a freshly felled tree it can even exceed 100 per cent. Wood shrinks as it loses moisture and swells as it takes it up, so moisture content largely decides whether furniture warps, cracks or opens at the joints.
Wood comes into balance with the humidity around it, a state known as equilibrium moisture content. For furniture in heated interiors, a typical target is around 8 to 12 per cent. It is usually measured with a pin or pinless electronic moisture meter. Drying is done in the open air or in a controlled kiln, and kiln drying is faster and more consistent.
In solid furniture, door, flooring, stair and veneer production, moisture content is checked before manufacture. For boards, service class and moisture resistance are what is specified. The factory usually lets timber acclimatise to the humidity of the room where it will be used.
When specifying, ask for the moisture value of the material. Furniture made from wet timber cracks over time. Pieces assembled while dry can swell in summer and shrink apart in winter, so joints should allow for this movement. Keeping the home at roughly 40 to 60 per cent relative humidity protects the wood.



