The mortise and tenon is among the oldest and strongest ways of joining timber. A rectangular tenon cut on the end of one piece fits into a mortise cut in the other and is normally fixed with glue. The large glue area and mechanical interlock make it long-lasting in load-bearing frames, doors, tables and chairs.
There are several types. In a blind tenon the projection does not break through the other piece, so it is hidden from the face. A through tenon shows on the opposite side and can be decorative. Corners often use mitred or shouldered versions. Production uses tenoning machines, vertical routers and CNC machines, while small workshops can cut it with a chisel and hand saw. Dowelled joints are a faster industrial alternative.
For a good joint the tenon is usually about one third of the thickness of the piece, and the fit should be snug, closing under hand pressure rather than force. A loose fit stays weak even when filled with glue. In solid wood, grain direction and moisture movement must be considered, and in wide frames the tenon length should be generous. Kept indoors and dry, this joint can last for decades.


