A thermofoil or membrane door is made by shaping a thin heated PVC film under vacuum over the face and edges of an MDF door and bonding it. The film follows the routed profile, carved and embossed details without a break. As a result the door looks like a single piece, similar to a painted or lacquered surface, and needs no edge banding.
The film comes in matt, gloss, wood-grain, stone and metal finishes. It is an economical way to get profiled doors such as Shaker, classic panel and carved styles. The surface is generally resistant to scratching and moisture, but near strong heat the film can lift or change colour.
It is used for kitchen and bathroom cabinet doors, wardrobe and TV unit doors, interior doors and wall panels. It is particularly common in classic and transitional kitchens.
When specifying, check the film thickness, the bond quality and how neatly the film wraps at corners. Heat protection should be considered around ovens, hobs and extractor hoods, where the film can open up. A soft cloth and neutral detergent are enough for care. A damaged door may not be repairable in place, so replacing the door may be necessary.



