A wall plug is an anchor fitted into a hole drilled in a wall, which expands as the screw is tightened and grips the material. It is used to fix cabinets, shelves and mirrors to the wall. A screw on its own does not hold well in brick, aerated block or concrete, whereas a plug spreads the load over a wider area and stops the screw pulling out.
The type is chosen to suit the wall material. For concrete and solid brick, plastic, nylon or steel-pin plugs are common. For hollow brick and aerated block, long winged plugs or chemical anchors are preferred, and for plasterboard, butterfly or folding metal fixings. The length and diameter of each plug must match the screw, and the longer or more numerous the plugs, the heavier the load they can carry.
Wall plugs matter for safety with wall-hung kitchen cabinets, bathroom units, TV units and shelves in homes and offices. The right plug and screw depend on identifying the wall type beforehand, and pipes and cables should be checked for before drilling. The hole should be cleaned, the plug seated fully and the screw not overtightened. When in doubt, choose a plug with a higher load rating and take the advice of an experienced fitter.


