A confirmat screw is a thick, coarse-threaded furniture screw developed for joining engineered boards such as chipboard and MDF. Its shank is straight rather than tapered and its head is wide, which gives a strong hold inside the board. Unlike an ordinary wood screw, it can be driven in without tearing the particle structure.
It fits into a hole drilled with a stepped bit of two diameters, one part matching the head and the other the shank. The head is turned with a hex or star socket and may be sunk flush or hidden with a cover cap. Several lengths and diameters are available, chosen by panel thickness. The joint is permanent, and if it is undone and refitted often the hole may weaken, so a demountable fitting is better where parts will be taken apart frequently.
Confirmat screws join the side, bottom and top panels of cabinet carcasses and are used for shelves and plinth fixings. For a sound result the pilot hole must be drilled with a proper confirmat bit, because a hole that is too small can split the board and one that is too large weakens the grip. The screw should not be overtightened, or the thread will strip. Choose a length suited to the panel thickness and use the correct driver bit.


