Moisture-resistant MDF is a fibreboard produced with special resin and water-repellent additives so that it absorbs less moisture and swells less than standard MDF. It is often tinted green for identification, which is why it is commonly called green MDF. It is moisture-resistant, not waterproof.
Compared with standard MDF, swelling from steam and short splashes is limited. It can be routed, painted and veneered. Density and internal structure are similar to standard MDF, and screw-holding strength falls within similar limits. It is not suitable for areas that are continuously immersed or that take direct water.
It is used in humid interiors such as bathroom and washbasin cabinets, kitchen carcasses and doors, laundry-room furniture, door and window linings, hotel bathrooms and toilet partitions.
When specifying, look at the manufacturer classification, because moisture resistance only counts when the cut edges are treated as well. Every cut edge, screw hole and pipe cut-out should be sealed with banding, paint or varnish. In unheated or poorly ventilated areas, long-term damp will still cause damage.



