Shelf sag is the bowing downwards of the middle of a shelf under load over time. When a shelf is supported at its two ends, the weight makes it bend in the middle. Small sags are not noticeable to the eye, but as they grow they look poor and can cause items to tip or the shelf to break.
The main factors are board material, thickness, span (the distance between supports) and load. Solid timber and plywood sag less than chipboard and MDF of the same thickness. In chipboard and MDF, staying under load for a long time increases sag. On the 18 mm boards common in furniture, sag becomes visible for heavy loads such as books as the span increases. For heavy loads, the span should generally be shortened or a thicker board chosen.
To reduce sag, a cabinet back panel can be fitted behind the shelf, a strip or thick edging added to the front edge, a vertical divider placed in the middle, or a timber batten or profile fixed beneath. These measures are particularly important on bookcase and wardrobe shelves.
Spreading shelf loads evenly, putting heavy items on lower shelves and making sure shelf support pins are seated firmly all reduce sag. Turning a sagged shelf over can be a temporary fix. In made-to-measure production, shelf span and load needs are calculated from the start.



