Doing the laundry is one of the jobs that comes round again and again at home. Collecting dirty clothes, washing, drying, folding and putting them away can spread through different parts of the house if there is no proper system.
Clothes airers set up in the living room, clean laundry waiting on the bed, or an ironing board taken out of a cupboard every time it is needed: these are all symptoms of too little work surface and storage.
A well-planned utility room lets all these tasks happen close together. When the washing machine, tumble dryer, folding worktop, cleaning cupboards and drying area are designed as a whole, the daily routine runs more smoothly.
You do not necessarily need a separate room, either. A suitable corner of the bathroom, a niche in the hallway or a made-to-measure cupboard system can serve the same purpose.
So how should the washing machine and dryer be positioned? How should plumbing and ventilation be planned? How much space should you set aside for a folding worktop, a drying area and storage cupboards?
In this guide, we look at the right layout for a utility room, machine dimensions, storage options and the technical details to watch for.
Where should the utility room go?
When choosing the position of the laundry area, start with the home’s existing plumbing, the space available and how you use it day to day.
The positions of the water supply and waste connections in particular can directly affect where the washing machine goes.
The electrical supply, ventilation options and the noise the machines make also matter.
A separate utility room
A separate utility room makes it easier to wash, dry, fold and store laundry in one place.
In a room like this, you can fit a folding worktop, tall units, laundry baskets and an ironing area alongside the machines.
As well as the size of the room, though, the machine doors need room to open and people need room to move comfortably.
A laundry area in the bathroom
Bathrooms can suit a washing machine because water and waste connections are already there.
At the same time, take into account the damp conditions in the bathroom and how heavily it is used.
Leave enough space around the machine, choose cabinet materials to suit the moisture, and check that the electrical connections meet the safety requirements for wet areas.
A niche in the hallway
Recesses in hallways can be turned into a laundry area.
With made-to-measure cupboard systems, the machines and cleaning supplies can be stored together.
With the doors closed, the laundry area can look like part of the hallway’s other fitted furniture.
This arrangement needs suitable water, waste, electrical and ventilation conditions, however.
A washing machine in the kitchen
In small homes, the washing machine can go under the kitchen worktop.
This can make use of the plumbing already in place.
It is important to think about where dirty laundry will be kept, where clothes will dry and where detergents will be stored.
An enclosed balcony
In some homes, an enclosed balcony that is sheltered and has suitable services can serve as a laundry area.
Environmental effects such as direct sun, high temperatures, rain and cold air need to be taken into account, however.
You should also check that the structure and services of the balcony are suitable for this use.
Designing a laundry niche for small spaces
Not every home has room for a separate utility room.
In that case, a compact cupboard niche for the washing machine and dryer can be a practical alternative.
Systems that stack the two machines save floor space in particular.
Many household machines are about 60 cm wide, and a niche 65–70 cm wide can be a starting point.
This does not apply to every machine, though. Consider the actual width and depth of the appliance, how far the door projects, the connection hoses and the installation clearances given by the manufacturer.
Cupboards with doors for the laundry area
Fitting doors across the front of the laundry niche can keep the machines out of sight when they are not in use.
It matters that the doors, when open, do not block the machine doors.
The manufacturer’s ventilation requirements must also be met so that hot air building up inside the cupboard can escape.
Suitable vents or ventilation openings in the doors are worth considering.
Side storage cupboards
A cupboard about 30–40 cm wide beside the machine niche can provide extra storage for detergents and cleaning products.
Shelves, pull-out baskets or narrow drawers can go in this section.
The exact width of the cupboard should be decided once the installation allowances for the machines have been set aside.
How should plumbing be planned in a utility room?
One of the main technical issues in utility room design is the water, waste and electrical connections.
The positions of these points can affect where the machines sit and the dimensions of the cupboards.
Before manufacturing starts, the existing plumbing and the technical requirements of the appliances must be assessed.
Cold water supply
The washing machine needs a suitable water supply and a stop valve.
The water valve must not become completely inaccessible once the machine is in place.
You should be able to reach the connection safely if maintenance or a fault ever calls for it.
Waste connection
The washing machine’s drain hose should be connected to a waste point that meets the height and connection conditions given by the appliance manufacturer.
Waste connections made at the wrong height, or in an unsuitable way, can cause drainage problems.
A qualified plumber should therefore assess the route of the waste pipe and the connection details.
Electrical connections
Washing machines and tumble dryers can draw a lot of electrical power.
Electrical connections should follow the appliance manufacturer’s instructions and the electrical safety rules in force.
Suitable earthing, circuit capacity and the necessary protective devices should be checked by a qualified electrician.
Sockets need to be where water connections will not affect them and where they can be reached when necessary.
Avoid running the machines from ordinary extension leads or unsuitable multi-way adaptors.
Floor drain
In suitable projects, a floor drain in the laundry area is worth considering.
This can help to deal with any water leaks.
A floor drain alone does not give full protection against flooding, however. Waterproofing, the fall of the floor and the capacity of the drain need to be considered together.
Washing machine and tumble dryer dimensions
When setting the dimensions of utility room furniture, work from the actual sizes in the machines’ technical documents.
For many front-loading household washing machines and dryers, the approximate dimensions are:
- Width: around 60 cm
- Depth: about 55–65 cm or more, depending on the model
- Height: around 85 cm
These figures are a general reference only.
Machine doors, projecting front panels and rear connections can increase the total depth needed.
It is therefore not advisable to fix the final manufacturing dimensions of the cupboard niche before the machines are chosen.
Should the machines go side by side or stacked?
Washing machines and dryers can be arranged in different ways.
Which layout to choose depends on the width of the space, the users’ needs and the installation conditions of the appliances.
Stacked machines
Placing the dryer on top of the washing machine can reduce the floor space used in a narrow room.
With this method, the appliances must be suitable for stacking and the connecting kit approved by the manufacturer must be used.
The dryer is usually on top and the washing machine below.
The total height of the two machines varies with the model and connecting kit, but can be around 170–180 cm.
In this layout, bear in mind the following:
- You must be able to reach the door and control panel of the upper machine comfortably.
- The connecting kit must suit the models of appliance being used.
- The machine doors must open without hitting the cabinet panels.
- Ventilation and servicing clearances must be kept.
- The manufacturer’s instructions for fixing the upper appliance securely must be followed.
When stacking machines, placing one directly on top of the other without a suitable connecting system is not safe.
Side-by-side machines
Placing the machines side by side suits utility rooms with enough wall width.
With this layout, a long folding worktop can be built over the machines.
Two machines may need about 120–130 cm or more in width, depending on the appliance dimensions and the clearances required.
The worktop should be designed so that it does not put load directly on the machines or block their vibration.
The required clearances should be left in line with the appliance manufacturer’s installation instructions.
Raised machines
In some projects, the machines can sit on suitable plinths or platforms.
This can mean less bending when loading and unloading the machine.
A raised position does not suit every appliance, however.
The platform used must be approved by the manufacturer, or must provide a safe support that meets the installation conditions of the appliance concerned.
Vibration, centre of gravity and the risk of tipping need particular attention.
How much space should be left in front of the machines?
For the washing machine, it is not enough that the appliance simply fits in the cupboard.
With the machine door open, users need to be able to bend down comfortably, set down a laundry basket and use the appliance.
About 90–100 cm of clear space in front of the machine can be a starting reference for many layouts.
In larger spaces, a passage of around 110–120 cm gives more freedom of movement, especially when using laundry baskets.
The exact distance should be set according to how far the machine door opens, the size of the room and the users’ needs.
It also matters that the machine doors do not clash with cupboards opposite, drawers or the room door.
How should the laundry workflow be arranged?
A utility room is practical when washing and drying are planned in a sensible order.
In an ideal layout, the aim is to avoid constantly carrying laundry to different parts of the house.
The usual order of use is:
Collecting dirty laundry → Sorting → Washing → Drying → Folding → Ironing → Storing
When the areas needed for these tasks are close together, everyday use becomes easier.
Collecting and sorting dirty laundry
Separate baskets, or laundry systems with compartments, can be used for whites, colours and delicates.
Pull-out baskets can give a tidier appearance inside a cupboard with doors.
It matters that the baskets are easy to remove and clean.
Washing area
Beside the washing machine there can be storage sections for detergent, stain remover and other laundry products.
If space and plumbing allow, a small sink for hand washing or pre-treatment is also worth considering.
Drying area
Having the dryer close to the washing machine makes it easier to move wet laundry.
For clothes that need to be hung to dry, a separate rail or a fold-away drying rack can also be planned.
Folding area
A worktop of suitable width for folding clean laundry can reduce the need to do this on the bed or the dining table.
Ironing and final storage
The ironing board, hanging rails and clean laundry baskets can be arranged in the same area.
Separate baskets or shelves for each member of the household can make it easier to distribute clothes to the bedrooms.
What should a laundry folding worktop be like?
A folding worktop is one of the most useful pieces of furniture in a utility room.
Clean clothes taken out of the machines can be folded, sorted and placed in baskets on this surface.
The height of the folding worktop should be set according to the user’s height and working habits.
A range of about 85–95 cm suits many users.
For people who spend a long time at it, the height should be adjusted to the individual so that they do not have to lean forward.
Worktop width
A work surface about 80–100 cm long, or wider, can be useful for folding.
In larger families, a bigger folding area is worth considering.
A worktop over the machines
A shared worktop can be built over machines placed side by side.
This gives you a large work surface without setting aside space for a separate table.
The worktop needs its own supporting structure, and the vibration and ventilation clearances of the appliances must be kept.
Storage under the worktop
Drawers, laundry baskets or open shelves can go under the folding worktop.
These sections can hold pegs, laundry care accessories and small items used every day.
How should utility room storage be planned?
Utility rooms are not only for the machines.
There may also be a need for storage for detergents, cleaning products, the ironing board, the vacuum cleaner and other cleaning equipment.
The inside layout of the cupboards should therefore be set according to what will be stored.
Wall units above the machines
The wall area above the washing machines can be used for wall units where conditions allow.
Units about 30–35 cm deep can hold detergents and small cleaning products.
The height and depth of the shelves should be set according to the size of the products.
It helps if the items you use daily are on shelves that are easy to reach.
Detergents and cleaning supplies
Detergents and cleaning chemicals should be kept in their own packaging and stored as the manufacturer’s instructions say.
In homes with children especially, these products should be kept in locked, safe cupboards.
Putting them on a high shelf alone may not be safe enough in every case.
Cupboards for the vacuum cleaner and ironing board
Tall units are worth considering for bulky items such as the vacuum cleaner, mop and ironing board.
It is important to make vertical compartments that fit the dimensions of these items.
If you plan an electrical connection for cordless vacuum cleaners, take into account the appliance manufacturer’s charging and ventilation requirements.
Drawers and small accessories
Shallow drawers can be used for pegs, sewing supplies, laundry bags and similar items.
Dividers inside the drawers keep small items in better order.
Built-in and fold-away ironing boards
The ironing board is one of those household items that can be hard to store when it is not in use.
In small utility rooms especially, taking the ironing board out and putting it back every time can be a chore.
In some projects, ironing boards that are hidden inside a cupboard are therefore worth considering.
Pull-out ironing boards
You can use ironing boards with a special mechanism that pull out of a drawer or cupboard of suitable size.
When you have finished, the board can be folded and put back inside the cupboard.
With these systems, check the load capacity of the mechanism and its suitability for use with an iron.
Wall-mounted fold-down ironing boards
Fold-down models fixed to the wall can offer an alternative in small spaces.
When not in use, they can be folded away to keep the passage clear.
The wall fixing, heat effects and safe-use requirements must be considered, however.
Where an iron is used, suitable socket positions and heat-resistant work surfaces also matter.
Drying and hanging areas
Even in homes with a tumble dryer, some garments need to be hung or dried flat.
A small drying area in the utility room can therefore be useful.
Hanging rails
Hanging rails can go under wall units or between two suitable surfaces.
Shirts, dresses and delicate garments can be hung to dry in these sections.
The space below the rail should be set by the length of the longest garment to be hung.
For short garments, a clearance of about 100–110 cm can be a starting figure, while longer garments may need more height.
Fold-away drying racks
Drying racks fixed to the wall, or pulled out from inside a cupboard, are worth considering in small spaces.
Models that can be closed when not in use keep the room free to move around.
Ceiling-mounted drying racks
In rooms with suitable ceiling height, pulley or lowering drying rack systems can be used.
The structure of the ceiling, the fixings and the load of wet laundry the rack will carry need to be considered.
Flat drying for delicates
Some jumpers and delicate textiles can lose their shape when hung.
For clothes like these, suitable flat drying racks that allow air to circulate are worth considering.
There must be enough ventilation to remove moisture from the drying area.
Why does ventilation matter in a utility room?
Utility rooms are places where humidity can rise, particularly because of washing and hanging laundry to dry.
Poor ventilation can lead to condensation on the walls and mould on some surfaces.
Cabinets and wood-based surfaces in the utility room that are exposed to high moisture for long periods are also more likely to deform.
Ventilation should therefore be considered at the start of the design.
Utility rooms with a window
In rooms with a window, suitable airflow can be achieved.
Having a window does not mean ventilation is adequate in every situation, however.
Where a lot of laundry is dried at the same time in particular, the humidity level should be monitored.
Utility rooms without a window
Spaces with no window may need suitable mechanical ventilation.
The capacity of the ventilation should be set according to the size of the room, the drying method and the existing building conditions.
Ventilating the tumble dryer
The technical requirements of tumble dryers vary with the type of appliance.
Vented models need the moist air to be expelled to the outside properly.
Condenser and heat pump models can use a water tank or a waste connection.
Even with these appliances, the room and installation ventilation conditions specified by the manufacturer must be maintained.
For machines installed inside a cupboard with doors, it is important not to overlook the ventilation requirements.
Choosing materials for a utility room
Utility room furniture can meet more moisture and water splashing than furniture in other parts of the home.
It is therefore important that the materials and joint details suit the conditions.
Suitable moisture-resistant wood-based panels can be considered for the cabinet carcasses.
Remember that moisture-resistant materials are not completely waterproof.
The cut edges of the panels, fixing holes and pipe penetrations in particular must be properly protected.
Cupboard doors
For the doors, lacquer, suitable decorative finishes or natural wood veneer with a protective treatment can be considered.
When choosing, take into account how easy the finish is to clean, the moisture conditions and how heavily the room is used.
Folding worktop
For the folding worktop, choose a surface that is easy to clean and suited to everyday use.
If the worktop has a sink, the joints that come into contact with water must be sealed properly.
Plinth and base units
Protective details against contact with water can be used on units that stand on the floor.
Adjustable feet and suitable plinth solutions can reduce direct contact between the cabinet carcass and moisture on the floor.
The waterproofing of the floor and the structure should be considered separately for any water leaks, however.
Easy cleaning
In laundry areas, it matters that detergent residue and everyday dirt can be cleaned off.
It helps if the surfaces can be wiped with suitable non-abrasive cleaners.
Space-saving solutions for small utility rooms
In narrow utility rooms, or in homes where only a niche is available, it is important to make good use of the space you have.
In spaces like these, compact furniture that serves several functions can be chosen instead of large cupboards.
Stacked machines
With suitable appliances and an approved connecting kit, stacking the machines can reduce the floor area used.
In the space freed up, a narrow cleaning cupboard or other storage can be built.
Storage up to the ceiling
Taking wall units up to the ceiling can make use of wall height that would otherwise be wasted.
Seasonal and rarely used items can be stored in the upper sections.
A safe way of reaching these sections should be considered.
Pull-out laundry baskets
Pull-out baskets used inside a cupboard can keep dirty laundry out of sight.
It matters that the baskets are easy to remove and clean.
Fold-away worktops
Where there is not enough fixed worktop, fold-away work surfaces mounted on the wall or hidden inside a cupboard are worth considering.
With these systems, the safe-use requirements of the support fixings and the folding mechanisms must be met.
Wall-mounted hanging rails
Fold-away wall rails can be used for drying and for temporary hanging.
When they are not in use, the room stays free to move around.
7 common mistakes in utility room planning
1. Making the cupboards before choosing the machine models
If the actual machine dimensions and installation clearances are not known, the cupboard niches may turn out too small.
2. Leaving water valves and sockets inaccessible
If the services are completely hidden behind the cupboard or machine, maintenance and repairs become harder.
3. Fitting machines tight against the cabinet panels
Not leaving the necessary clearances for vibration, ventilation and installation can affect the use of both the appliances and the furniture.
4. Not planning a folding area
Without a suitable surface for folding clean laundry, the job moves to other parts of the house.
5. Ignoring ventilation
In windowless spaces, or where laundry is hung to dry, high humidity can cause problems on surfaces and in the cupboards.
6. Not storing cleaning chemicals safely
Detergents and other cleaning products in places children can reach pose a safety risk.
7. Overlooking access height when machines are stacked
If the door and control panel of the upper dryer are hard to reach, daily use becomes awkward.
Advantages of made-to-measure utility room furniture
The width and height that can be set aside for a laundry area differ from home to home.
In some homes the machines can go side by side, while in others stacking them or using a narrow cupboard niche may suit better.
Made-to-measure furniture design lets you plan the machines, shelves, folding worktop and storage sections together within the space available.
For example, a folding worktop can be built over the machines, a tall unit for cleaning supplies can go at the side, or unused wall areas can be fitted with open shelves.
In narrow spaces, machine niches with doors, pull-out baskets and fold-away work surfaces can be used.
It is important that all of these decisions are compatible with the machine manufacturers’ installation requirements and the existing plumbing.
Before starting to plan the utility room furniture, then, the dimensions and technical needs of the appliances to be used should be established.
A tidy utility room makes everyday jobs easier
A utility room does not have to be large to work well.
Positioning the machines correctly, leaving a suitable surface for folding, storing cleaning supplies in order and providing enough ventilation can make even a small space easy to use.
In a well-planned laundry area, washing, drying, folding and storing work together in a single routine.
At Wood Mood Furniture, we start designing utility room furniture with a site survey and measuring. Together we look at the dimensions of the machines you will use, the existing plumbing points, the folding space you need and what you expect from your storage.
We plan the layout of cupboards, shelves, drawers and worktops in the drawings, make the approved furniture to measure in our own factory and install it on site to suit the machine layout.
A well-designed utility room does more than bring the machines together; it makes the whole process, from washing to folding, more orderly and practical.




